Load the specified plugin
--plugin - load the specified plugin
--target=BFDNAME - specify the target object format as BFDNAME
-H --help Print this help message
-v --verbose Verbose - tells you what it's doing
-V --version Print version information
-I --histogram Display histogram of bucket list lengths
-W --wide Allow output width to exceed 80 characters
@ Read options from
-H --help Display this information
-v --version Display the version number of readelf
-I --input-target Assume input file is in format
-O --output-target Create an output file in format
-B --binary-architecture Set output arch, when input is arch-less
-F --target Set both input and output format to
--debugging Convert debugging information, if possible
-p --preserve-dates Copy modified/access timestamps to the output
-j --only-section Only copy section into the output
--add-gnu-debuglink= Add section .gnu_debuglink linking to
-R --remove-section Remove section from the output
-S --strip-all Remove all symbol and relocation information
-g --strip-debug Remove all debugging symbols & sections
--strip-unneeded Remove all symbols not needed by relocations
-N --strip-symbol Do not copy symbol
--strip-unneeded-symbol
Do not copy symbol unless needed by
relocations
--only-keep-debug Strip everything but the debug information
--extract-symbol Remove section contents but keep symbols
-K --keep-symbol Do not strip symbol
--keep-file-symbols Do not strip file symbol(s)
--localize-hidden Turn all ELF hidden symbols into locals
-L --localize-symbol Force symbol to be marked as a local
--globalize-symbol Force symbol to be marked as a global
-G --keep-global-symbol Localize all symbols except
-W --weaken-symbol Force symbol to be marked as a weak
--weaken Force all global symbols to be marked as weak
-w --wildcard Permit wildcard in symbol comparison
-x --discard-all Remove all non-global symbols
-X --discard-locals Remove any compiler-generated symbols
-i --interleave [] Only copy N out of every bytes
--interleave-width Set N for --interleave
-b --byte Select byte in every interleaved block
--gap-fill Fill gaps between sections with
--pad-to Pad the last section up to address
--set-start Set the start address to
{--change-start|--adjust-start}
Add to the start address
{--change-addresses|--adjust-vma}
Add to LMA, VMA and start addresses
{--change-section-address|--adjust-section-vma} {=|+|-}
Change LMA and VMA of section by
--change-section-lma {=|+|-}
Change the LMA of section by
--change-section-vma {=|+|-}
Change the VMA of section by
{--[no-]change-warnings|--[no-]adjust-warnings}
Warn if a named section does not exist
--set-section-flags =
Set section 's properties to
--add-section = Add section found in to output
--rename-section =[,] Rename section to
--long-section-names {enable|disable|keep}
Handle long section names in Coff objects.
--change-leading-char Force output format's leading character style
--remove-leading-char Remove leading character from global symbols
--reverse-bytes= Reverse bytes at a time, in output sections with content
--redefine-sym = Redefine symbol name to
--redefine-syms --redefine-sym for all symbol pairs
listed in
--srec-len Restrict the length of generated Srecords
--srec-forceS3 Restrict the type of generated Srecords to S3
--strip-symbols -N for all symbols listed in
--strip-unneeded-symbols
--strip-unneeded-symbol for all symbols listed
in
--keep-symbols -K for all symbols listed in
--localize-symbols -L for all symbols listed in
--globalize-symbols --globalize-symbol for all in
--keep-global-symbols -G for all symbols listed in
--weaken-symbols -W for all symbols listed in
--alt-machine-code Use the target's 'th alternative machine
--writable-text Mark the output text as writable
--readonly-text Make the output text write protected
--pure Mark the output file as demand paged
--impure Mark the output file as impure
--prefix-symbols Add to start of every symbol name
--prefix-sections Add to start of every section name
--prefix-alloc-sections
Add to start of every allocatable
section name
--file-alignment Set PE file alignment to
--heap [,] Set PE reserve/commit heap to /
--image-base Set PE image base to
--section-alignment Set PE section alignment to
--stack [,] Set PE reserve/commit stack to /
--subsystem [:]
Set PE subsystem to [& ]
--compress-debug-sections Compress DWARF debug sections using zlib
--decompress-debug-sections Decompress DWARF debug sections using zlib
-v --verbose List all object files modified
@ Read options from
-V --version Display this program's version number
-h --help Display this output
--info List object formats & architectures supported
-I --input-target= Assume input file is in format
-O --output-target= Create an output file in format
-F --target= Set both input and output format to
-p --preserve-dates Copy modified/access timestamps to the output
-R --remove-section= Remove section from the output
-s --strip-all Remove all symbol and relocation information
-g -S -d --strip-debug Remove all debugging symbols & sections
--strip-unneeded Remove all symbols not needed by relocations
--only-keep-debug Strip everything but the debug information
-N --strip-symbol= Do not copy symbol
-K --keep-symbol= Do not strip symbol
--keep-file-symbols Do not strip file symbol(s)
-w --wildcard Permit wildcard in symbol comparison
-x --discard-all Remove all non-global symbols
-X --discard-locals Remove any compiler-generated symbols
-v --verbose List all object files modified
-V --version Display this program's version number
-h --help Display this output
--info List object formats & architectures supported
-o Place stripped output into
-S, --print-size Print size of defined symbols
-s, --print-armap Include index for symbols from archive members
--size-sort Sort symbols by size
--special-syms Include special symbols in the output
--synthetic Display synthetic symbols as well
-t, --radix=RADIX Use RADIX for printing symbol values
--target=BFDNAME Specify the target object format as BFDNAME
-u, --undefined-only Display only undefined symbols
-X 32_64 (ignored)
@FILE Read options from FILE
-h, --help Display this information
-V, --version Display this program's version number
-a, --archive-headers Display archive header information
-f, --file-headers Display the contents of the overall file header
-p, --private-headers Display object format specific file header contents
-P, --private=OPT,OPT... Display object format specific contents
-h, --[section-]headers Display the contents of the section headers
-x, --all-headers Display the contents of all headers
-d, --disassemble Display assembler contents of executable sections
-D, --disassemble-all Display assembler contents of all sections
-S, --source Intermix source code with disassembly
-s, --full-contents Display the full contents of all sections requested
-g, --debugging Display debug information in object file
-e, --debugging-tags Display debug information using ctags style
-G, --stabs Display (in raw form) any STABS info in the file
-W[lLiaprmfFsoRt] or
--dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,
=frames-interp,=str,=loc,=Ranges,=pubtypes,
=gdb_index,=trace_info,=trace_abbrev,=trace_aranges]
Display DWARF info in the file
-t, --syms Display the contents of the symbol table(s)
-T, --dynamic-syms Display the contents of the dynamic symbol table
-r, --reloc Display the relocation entries in the file
-R, --dynamic-reloc Display the dynamic relocation entries in the file
@ Read options from
-v, --version Display this program's version number
-i, --info List object formats and architectures supported
-H, --help Display this information
-b, --target=BFDNAME Specify the target object format as BFDNAME
-m, --architecture=MACHINE Specify the target architecture as MACHINE
-j, --section=NAME Only display information for section NAME
-M, --disassembler-options=OPT Pass text OPT on to the disassembler
-EB --endian=big Assume big endian format when disassembling
-EL --endian=little Assume little endian format when disassembling
--file-start-context Include context from start of file (with -S)
-I, --include=DIR Add DIR to search list for source files
-l, --line-numbers Include line numbers and filenames in output
-F, --file-offsets Include file offsets when displaying information
-C, --demangle[=STYLE] Decode mangled/processed symbol names
The STYLE, if specified, can be `auto', `gnu',
`lucid', `arm', `hp', `edg', `gnu-v3', `java'
or `gnat'
-w, --wide Format output for more than 80 columns
-z, --disassemble-zeroes Do not skip blocks of zeroes when disassembling
--start-address=ADDR Only process data whose address is >= ADDR
--stop-address=ADDR Only process data whose address is <= ADDR
--prefix-addresses Print complete address alongside disassembly
--[no-]show-raw-insn Display hex alongside symbolic disassembly
--insn-width=WIDTH Display WIDTH bytes on a single line for -d
--adjust-vma=OFFSET Add OFFSET to all displayed section addresses
--special-syms Include special symbols in symbol dumps
--prefix=PREFIX Add PREFIX to absolute paths for -S
--prefix-strip=LEVEL Strip initial directory names for -S
-i --instruction-dump=
Disassemble the contents of section
-r Ignored for compatibility with rc
@ Read options from
-h --help Print this help message
-V --version Print version information
-t Update the archive's symbol map timestamp
-h --help Print this help message
-v --version Print version information
@ - read options from
ABI Version: %d
Addr: 0x Advance Line by %s to %d
Advance PC by %s to 0x%s
Advance PC by %s to 0x%s[%d]
Advance PC by constant %s to 0x%s
Advance PC by constant %s to 0x%s[%d]
Advance PC by fixed size amount %s to 0x%s
Class: %s
Cnt: %d
Compact model %d
Compilation Unit @ offset 0x%s:
Copy
DWARF Version: %d
DW_CFA_??? (User defined call frame op: %#x)
Data: %s
Entry Dir Time Size Name
Entry point address: Extended opcode %d: Extension opcode arguments:
File: %lx File: %s Flags Flags: 0x%lx%s
Flags: %s Version: %d
Generic options:
Index: %d Cnt: %d Initial value of 'is_stmt': %d
Length: %ld
Length: %ld
Length: %ld
Line Base: %d
Line Range: %d
Machine: %s
Magic: Maximum Ops per Instruction: %d
Minimum Instruction Length: %d
No aux header
No emulation specific options
No section header
No strings found in this section. Note: This section has relocations against it, but these have NOT been applied to this dump.
Num Buc: Value Size Type Bind Vis Ndx Name
Num Buc: Value Size Type Bind Vis Ndx Name
Num: Index Value Name Number TAG
Number of program headers: %ld Number of section headers: %ld OS/ABI: %s
Offset Info Type Sym. Value Sym. Name
Offset Info Type Sym. Value Sym. Name + Addend
Offset into .debug_info section: 0x%lx
Offset into .debug_info: 0x%lx
Offset into .debug_line: 0x%lx
Offset size: %d
Offset: 0x%lx
Offset: %#08lx Link: %u (%s)
Opcode %d has %d args
Opcode Base: %d
Options for %s:
Options passed to DLLTOOL:
Personality routine: Pointer Size: %d
Prologue Length: %d
Registers restored: Rest are passed unmodified to the language driver
Restore stack from frame pointer
Return register: %s
Section header string table index: %ld Segment Sections...
Segment Size: %d
Set File Name to entry %s in the File Name Table
Set ISA to %lu
Set ISA to %s
Set basic block
Set column to %s
Set epilogue_begin to true
Set is_stmt to %s
Set prologue_end to true
Size of area in .debug_info section: %ld
Size of program headers: %ld (bytes)
Size of section headers: %ld (bytes)
Size of this header: %ld (bytes)
Special opcode %d: advance Address by %s to 0x%s Special opcode %d: advance Address by %s to 0x%s[%d] Stack increment %d
Tag Type Name/Value
Type Offset VirtAddr PhysAddr
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
Type: %s
Unhandled magic
Unknown opcode %d with operands: Unknown section contexts
Version def aux past end of section
Version definition past end of section
Version: %d
Version: %d %s
Version: 0x%lx
Version: %d
Version: %d
[-X32] - ignores 64 bit objects
[-X32_64] - accepts 32 and 64 bit objects
[-X64] - ignores 32 bit objects
[-g] - 32 bit small archive
[D] - use zero for timestamps and uids/gids
[N] - use instance [count] of name
[Nr] Name
[Nr] Name Type Address Offset
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[P] - use full path names when matching
[S] - do not build a symbol table
[T] - make a thin archive
[Truncated data]
[V] - display the version number
[a] - put file(s) after [member-name]
[b] - put file(s) before [member-name] (same as [i])
[c] - do not warn if the library had to be created
[f] - truncate inserted file names
[o] - preserve original dates
[s] - create an archive index (cf. ranlib)
[u] - only replace files that are newer than current archive contents
[v] - be verbose
d - delete file(s) from the archive
define new File Table entry
flags: 0x%04x import file off: %u
import strtab len: %u
m[ab] - move file(s) in the archive
magic: 0x%04x (0%04o) nbr import files: %u
nbr relocs: %u
nbr sections: %d
nbr symbols: %u
nbr symbols: %d
opt hdr sz: %d
p - print file(s) found in the archive
q[f] - quick append file(s) to the archive
r[ab][f][u] - replace existing or insert new file(s) into the archive
s - act as ranlib
scnlen: %08x nreloc: %-6u
scnlen: %08x nreloc: %-6u nlinno: %-6u
string table len: %u
string table off: %u
symbols off: 0x%08x
t - display contents of archive
time and date: 0x%08x - version: %u
x[o] - extract file(s) from the archive
%3u %3u %s byte block: (File Offset: 0x%lx) (bytes into file)
(bytes into file)
Start of section headers: (bytes)
(end of tags at %08x)
(indirect string, offset: 0x%s): %s (inlined by) (no strings):
(start == end) (start > end) (strings size: %08x):
<%d><%lx>: ...
<%d><%lx>: Abbrev Number: %lu Addr: Addr: 0x At least one of the following switches must be given:
Canonical gp value: Convert addresses into line number/file name pairs.
Convert an object file into a NetWare Loadable Module
Copies a binary file, possibly transforming it in the process
DW_MACINFO_define - lineno : %d macro : %s
DW_MACINFO_end_file
DW_MACINFO_start_file - lineno: %d filenum: %d
DW_MACINFO_undef - lineno : %d macro : %s
DW_MACINFO_vendor_ext - constant : %d string : %s
DW_MACRO_GNU_%02x
DW_MACRO_GNU_%02x - DW_MACRO_GNU_define - lineno : %d macro : %s
DW_MACRO_GNU_define_indirect - lineno : %d macro : %s
DW_MACRO_GNU_end_file
DW_MACRO_GNU_start_file - lineno: %d filenum: %d
DW_MACRO_GNU_start_file - lineno: %d filenum: %d filename: %s%s%s
DW_MACRO_GNU_transparent_include - offset : 0x%lx
DW_MACRO_GNU_undef - lineno : %d macro : %s
DW_MACRO_GNU_undef_indirect - lineno : %d macro : %s
Display information about the contents of ELF format files
Display information from object .
Display printable strings in [file(s)] (stdin by default)
Displays the sizes of sections inside binary files
Entries:
Generate an index to speed access to archives
Global entries:
If no addresses are specified on the command line, they will be read from stdin
If no input file(s) are specified, a.out is assumed
Lazy resolver
Length Number %% of total Coverage
List symbols in [file(s)] (a.out by default).
Local entries:
Module pointer
Module pointer (GNU extension)
NONE NOTE: This section has relocations against it, but these have NOT been applied to this dump.
Name (len: %u): None
Num: Name BoundTo Flags
Offset Info Type Sym. Value Symbol's Name
Offset Info Type Sym. Value Symbol's Name + Addend
Offset Info Type Sym.Value Sym. Name
Offset Info Type Sym.Value Sym. Name + Addend
Options are:
-a --all Equivalent to: -h -l -S -s -r -d -V -A -I
-h --file-header Display the ELF file header
-l --program-headers Display the program headers
--segments An alias for --program-headers
-S --section-headers Display the sections' header
--sections An alias for --section-headers
-g --section-groups Display the section groups
-t --section-details Display the section details
-e --headers Equivalent to: -h -l -S
-s --syms Display the symbol table
--symbols An alias for --syms
--dyn-syms Display the dynamic symbol table
-n --notes Display the core notes (if present)
-r --relocs Display the relocations (if present)
-u --unwind Display the unwind info (if present)
-d --dynamic Display the dynamic section (if present)
-V --version-info Display the version sections (if present)
-A --arch-specific Display architecture specific information (if any).
-c --archive-index Display the symbol/file index in an archive
-D --use-dynamic Use the dynamic section info when displaying symbols
-x --hex-dump=
Dump the contents of section as bytes
-p --string-dump=
Dump the contents of section as strings
-R --relocated-dump=
Dump the contents of section as relocated bytes
-w[lLiaprmfFsoRt] or
--debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,
=frames-interp,=str,=loc,=Ranges,=pubtypes,
=gdb_index,=trace_info,=trace_abbrev,=trace_aranges]
Display the contents of DWARF2 debug sections
PLT lazy resolver
Print a human readable interpretation of a COFF object file
Removes symbols and sections from files
Reserved entries:
The options are:
The options are:
-A|-B --format={sysv|berkeley} Select output style (default is %s)
-o|-d|-x --radix={8|10|16} Display numbers in octal, decimal or hex
-t --totals Display the total sizes (Berkeley only)
--common Display total size for *COM* syms
--target= Set the binary file format
@ Read options from
-h --help Display this information
-v --version Display the program's version
The options are:
-I --input-target= Set the input binary file format
-O --output-target= Set the output binary file format
-T --header-file= Read for NLM header information
-l --linker= Use for any linking
-d --debug Display on stderr the linker command line
@ Read options from .
-h --help Display this information
-v --version Display the program's version
The options are:
-a - --all Scan the entire file, not just the data section
-f --print-file-name Print the name of the file before each string
-n --bytes=[number] Locate & print any NUL-terminated sequence of at
- least [number] characters (default 4).
-t --radix={o,d,x} Print the location of the string in base 8, 10 or 16
-o An alias for --radix=o
-T --target= Specify the binary file format
-e --encoding={s,S,b,l,B,L} Select character size and endianness:
s = 7-bit, S = 8-bit, {b,l} = 16-bit, {B,L} = 32-bit
@ Read options from
-h --help Display this information
-v -V --version Print the program's version number
The options are:
-a --ascii_in Read input file as ASCII file
-A --ascii_out Write binary messages as ASCII
-b --binprefix .bin filename is prefixed by .mc filename_ for uniqueness.
-c --customflag Set custom flags for messages
-C --codepage_in= Set codepage when reading mc text file
-d --decimal_values Print values to text files decimal
-e --extension= Set header extension used on export header file
-F --target Specify output target for endianness.
-h --headerdir= Set the export directory for headers
-u --unicode_in Read input file as UTF16 file
-U --unicode_out Write binary messages as UFT16
-m --maxlength= Set the maximal allowed message length
-n --nullterminate Automatic add a zero termination to strings
-o --hresult_use Use HRESULT definition instead of status code definition
-O --codepage_out= Set codepage used for writing text file
-r --rcdir= Set the export directory for rc files
-x --xdbg= Where to create the .dbg C include file
that maps message ID's to their symbolic name.
The options are:
-a, --debug-syms Display debugger-only symbols
-A, --print-file-name Print name of the input file before every symbol
-B Same as --format=bsd
-C, --demangle[=STYLE] Decode low-level symbol names into user-level names
The STYLE, if specified, can be `auto' (the default),
`gnu', `lucid', `arm', `hp', `edg', `gnu-v3', `java'
or `gnat'
--no-demangle Do not demangle low-level symbol names
-D, --dynamic Display dynamic symbols instead of normal symbols
--defined-only Display only defined symbols
-e (ignored)
-f, --format=FORMAT Use the output format FORMAT. FORMAT can be `bsd',
`sysv' or `posix'. The default is `bsd'
-g, --extern-only Display only external symbols
-l, --line-numbers Use debugging information to find a filename and
line number for each symbol
-n, --numeric-sort Sort symbols numerically by address
-o Same as -A
-p, --no-sort Do not sort the symbols
-P, --portability Same as --format=posix
-r, --reverse-sort Reverse the sense of the sort
The options are:
-h --help Display this information
-v --version Print the program's version number
The options are:
-i --input= Name input file
-o --output= Name output file
-J --input-format= Specify input format
-O --output-format= Specify output format
-F --target= Specify COFF target
--preprocessor= Program to use to preprocess rc file
--preprocessor-arg= Additional preprocessor argument
-I --include-dir= Include directory when preprocessing rc file
-D --define [=] Define SYM when preprocessing rc file
-U --undefine Undefine SYM when preprocessing rc file
-v --verbose Verbose - tells you what it's doing
-c --codepage= Specify default codepage
-l --language= Set language when reading rc file
--use-temp-file Use a temporary file instead of popen to read
the preprocessor output
--no-use-temp-file Use popen (default)
The options are:
-q --quick (Obsolete - ignored)
-n --noprescan Do not perform a scan to convert commons into defs
-d --debug Display information about what is being done
@